Hardware Security System for Dial Modem or FAX Authentication



  • Expandable up to 64 TelCo Lines

  • Quick, Defeats Bad Calls in ½ Second

  • No Additional User Sign-on Delays

  • Deceptively Easy To Use

  • No User Training Required

  • Four Levels of Security

  • Transparent to the Hardware and Software

  • Programmable (Change, Add, or Defeat Keys)

  • No AC Power or Batteries for Caller's Key

  • Over 1 Billion Handshake Combinations

  • Serial Port for Event Logs, Reports, & Program

  • Works with Any Standard Analog Dial Device

  • Use for Stationary or Mobile Applications

  • Use with Current Passwords for "Two Factor Authentication"

The Standard Challenger is a programmable central site, hardware authentication system for dial modem security. The system operates on the analog side of the operative modems on a LOCK and KEY principle. This makes it completely independent of the hardware and software and puts no additional frustrating burden on the user. It can be used with mainframes or servers and any mix of terminals.

The system is very modular. The Host control unit (HCU) acts as a multi-line Lock and can support up to eight dial lines and up to 4,000 match box sized user Keys with unique ID numbers. Each line requires a Dial Line Module (DLM) that can be easily added or changed at any time. The matchbox sized user Keys require no AC power or battery and are transparent to other usages.

In the event that more phone lines are required, Expansion Chassis that supports eight additional lines can be added. Up to 64 lines can be supported on a single system through additional expansion chassis and DLMs.

The system can be used alone or as a hardware front end to established password systems for secure "two factor authentication" in stationary or mobile applications. It is a great way to quickly implement security without incurring additional user training. Often the savings in training costs are enough to justify the cost of the system.

In operation, each call is challenged for the presence of the proper Key connected to the caller's modem (RJ-11s). There are over one billion handshake combinations that change with each call offering a high degree of authentication. The system is very quick. Unauthorized calls are aborted within a ½ second while good calls pass transparently with no further delay. The sign-on time is a fraction of that of other systems that require the caller to interact with a hardware token keypad and a host control unit. This quickness also prevents war dialers from identifying the aborted call as a modem.

Each system has a unique system code making it usable right out of the box. However, the system code can be further modified and each user Key can also be programmed with a separate User ID code. All of this information is programmed into each Key by connecting it to the front panel of the Host Control unit and making the desired selections through the front panel push buttons or through a PC connected to the controller's serial port.

The serial port is also used to output an event log to a printer or PC as well as to obtain five pre-programmed administrative and audit reports. The reports list:
Active Key numbers
Destroyed Keys
Keys to be destroyed
Utilization by Line #, Time/Date, Key #, Good/Bad/Unanswered Calls
System configuration.

For more information on the Challengers, check out the Challenger Family Page. Also check out security comments and questions that were "Heard at the Booth".

Includes 1 Master Key & 1 DLM
Item No SECCH-MA Price $1195.00

Physical 19" W x 4" D x 3.5" H, 4.5 lbs.
Connectors (18) RJ-11 TelCo, Programming,
(1) RJ-45 RS-232,
(8) DB-25 DLM Connections
LEDs (6) Status, Programming
Switches (5) PushButtons Programming
Bell (1) Alarm
Cable (1) 5' RJ-11 Phone Cable,
(1) 3' RJ-45 Cable
Adaptor (1) RJ-45 to DB-25 Female RS-232
AC Power Wall Mount 12VAC 1A, 115V/60Hz

Includes 1 DLM
Item No SECCH-SL Price $1095.00

Physical 19" W x 4" D x 3.5" H, 4.5 lbs.
Connectors (16) RJ-11 TelCo,
(8) DB-25 DLM Connections
LEDs (3) Status
Switches None
Bell (1) Alarm
Cable (1) 5' RJ-11 Phone Cable
Adaptor None
AC Power Wall Mount 12VAC 1A, 115V/60Hz

Item No SECCH-LM Price $ 75.00

Physical 3.75" W x 2.25" D x .75" H, .25 lbs.
Connectors (1) DB-25 Challenger Connection
LEDs (4) Status
Switches None
Bell None
Cable None
Adaptor None
AC Power None

Quantity 1-5 6-10 11-25 26-50 51-100 100+
Price each $79.00 $75.00 $69.00 $65.00 $59.00 $55.00

Physical 1.5" W x 3" D x .75" H, .25 lbs.
Connectors (2) RJ-11 TelCo
LEDs (1) Verify Connection
Switches None
Bell None
Cable (1) 15" RJ-11 Phone Cable
Adaptor None
AC Power None