Relay Box

RELAY BOX (RB)

Provides dry contact closure from Reboot Controllers or Relay Concentrator. Maximum rating of 30VDC at 1A.

$32.00

Qty:


  • Normally Open or Normally Closed

  • Buzzer or LED Active Alert

  • Operates in Parallel With a Phone

  • Simple Installation

  • No AC power



The RELAY BOX is a "Base Unit" that operates with any of the CPS Remote ReBoot Controllers.

It provides a dry contact closure through the screw terminal lugs. The maximum switched current is 1A. Depending on the connection to the terminal lugs, the relay can be "normally open" or "normally closed".

A slide switch selects the "LED" or "Buzzer" as an activation alert.

The connection to the Controller of choice is through an RJ-11 analog connector. A second RJ-11 is provided so the unit may be connected in parallel to a phone, similar to other CPS "Base Unit" products.

A typical application may be to remotely close the relay and sound an alarm.


RELAY BOX (RB)
Item No SWTRLY Price $32.50

Physical 1.75" W x 3.25" D x .75" H, .25 lbs.
Connectors (2) RJ-11 TelCo/Control,
(3) Screw Terminal Lugs
LEDs (1) Activation Alert
Switches (1) Slide Activation Alert Select
Bell (1) Activation Alert
Cable (1) 5' RJ-11 Phone Cable
Adaptor None
AC Power None


-------------- OPTIONAL CONTROLLERS --------------

12 PORT RELAY CONCENTRATOR Twelve Control Ports (to Relay Box)
Item No SWTCON-12 Price $195.00

Required for Remote Control. See the specific Controller for additional specifications

TELEPHONE LINE Controllers
SP-RRC One Telco Line and One Control Port (to Relay Box)
Item No SWTSPRRC Price $135.00

3P-RRC One Telco Line and Three Control Ports (to Relay Box)
Item No SWT3PRRC Price $195.00


NETWORK Controller
N-RRC One RJ-45 TCP/IP Network Connection and One Control Port (to Relay Box)
Item No SWTRRC-N Price $169.00